Home › Forums › snickerdoodle › • Getting Started › how to reduce the DRAM size from 8Gb to 4Gb?

Tagged: 

Viewing 0 reply threads
  • Author
    Posts
    • jeff2148
      Participant
      Post count: 3

      Hello,

       

      I use Vivado 2019.2, Vitis 2019.2, Petalinux 2019.2, and Ubuntu VM 18.04 environment.

      I reused the Vivado design in the posting. (  https://www.hackster.io/whitney-knitter/petalinux-on-snickerdoodle-black-pismasher-baseboard-b23833   )

      I reduced the DRAM size from 8Gb to 4Gb with customizing the Zynq7 block in Vivado. The generated .xsa files were used by the petalinux as below.

      When the 8Gb DRAM is mounted on the board, the changed bootloader can be booted and the DDR SIZE is displayed as 512 MiB(4Gb) as below.

      However, when the 4Gb DRAM is mounted on the board, the bootloader doesn’t show any output on the serial terminal. Please help me to solve this problem. Thanks.

       

      Best Regards,

      Jeff

       

      ubuntu@ubuntu:~/pkg/petalinux/2019.2/snkrddl_blk_0$ petalinux-config –get-hw-description /home/ubuntu/Xilinx/Vivado/2019.2/snkrddl_blk_0-master

      ubuntu@ubuntu:~/pkg/petalinux/2019.2/snkrddl_blk_0$ petalinux-build

      ubuntu@ubuntu:~/pkg/petalinux/2019.2/snkrddl_blk_0$ petalinux-package –boot –format BIN –fsbl ~/Xilinx/Vivado/2019.2/snkrddl_blk_0-master/vitis_workspace/snickerdoodle_black_pismasher/export/snickerdoodle_black_pismasher/sw/snickerdoodle_black_pismasher/boot/fsbl.elf –fpga ~/Xilinx/Vivado/2019.2/snkrddl_blk_0-master/vitis_workspace/snickerdoodle_black_pismasher/export/snickerdoodle_black_pismasher/hw/snkrddl_blk_0_wrapper.bit –u-boot ~/pkg/petalinux/2019.2/snkrddl_blk_0/images/linux/u-boot.elf –force

       

      U-Boot 2019.01 (Nov 08 2024 – 07:24:47 +0000) Xilinx Zynq ZC702

       

      CPU:  Zynq 7z020

      Silicon: v3.1

      DRAM: ECC disabled 512 MiB

      MMC:  mmc@e0100000: 0, mmc@e0101000: 1

      Loading Environment from SPI Flash… SF: Detected n25q128a with page size 256 Bytes, erase size 64 KiB, total 16 MiB

      OK

      In:  serial@e0000000

      Out:  serial@e0000000

      Err:  serial@e0000000

      Net:  ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id

      eth0: ethernet@e000b000ZYNQ GEM: e000c000, phyaddr 0, interface rgmii-id

       

      Warning: ethernet@e000c000 (eth1) using random MAC address – f2:c1:cf:34:3f:8a

      , eth1: ethernet@e000c000

      Hit any key to stop autoboot: 0

      Zynq>

      Zynq>

      Zynq>

      Zynq>

      Zynq> bdinfo

      arch_number = 0x00000000

      boot_params = 0x00000000

      DRAM bank  = 0x00000000

      -> start  = 0x00000000

      -> size   = 0x20000000

      baudrate  = 115200 bps

      TLB addr  = 0x1fff0000

      relocaddr  = 0x1ff45000

      reloc off  = 0x1fb45000

      irq_sp   = 0x1f3204d0

      sp start  = 0x1f3204c0

      ARM frequency = 866 MHz

      DSP frequency = 0 MHz

      DDR frequency = 399 MHz

      Early malloc usage: 2bc / 800

      fdt_blob  = 0x1f3204e0

Viewing 0 reply threads
  • You must be logged in to reply to this topic.