snickerdoodle

Specifications

Feature

snickerdoodle one

snickerdoodle black
Chipset Xilinx Zynq-7010 Xilinx Zynq-7020
CPU 32-bit Dual-Core ARM Cortex-A9 w/640kB Cache and 2x 128-bit NEON Coprocessors
Performance 3,335 DMIPS/2.6 GFLOPS@667MHz 4,330 DMIPS/3.4 GFLOPS@866MHz
Flash 16MB XIP NOR + up to 200GB SDIO NAND via Captive MicroSD Card Cage
DRAM/bandwidth 512MB/25.6Gbps 1GB/25.6Gbps
SRAM/bandwidth 256kB/28.4 Gbps 256kB/36.9 Gbps
FPGA 430K gates/17,600 LUT-6 1.3M gates/53,200 LUT-6
32-bit performance 143,150 MIPS@350MHz 587,575 MIPS@475MHz
Distributed RAM 270kB/3,354Gbps 630kB/10,275Gbps
DSP Performance 74 GMACs/31.8 GFLOPS@461MHz 276 GMACs/121.5 GFLOPS@599MHz
Total User GPIO 155 180
FPGA I/O Performance 16x ADC/100x GPIO/46.2Gbps 16x ADC/125x GPIO/75.7Gbps
Fixed GPIO 33x GPIO, 4x I2S Audio, 14x I2C, 1x ADC, 2x DAC
Wi-Fi 150Mbps SISO 2.4GHz 802.11n 150Mbps 2×2 MIMO 2.4GHz/5GHz 802.11n
Antenna Dual-Band Antenna, Switched U.FL Ports
Serial Interfaces 2x Gigabit Ethernet, 2x CAN, 2x I2C, SPI, UART, USB 2.0 High-Speed, MicroUSB Console/JTAG
Analog Interfaces 2x 1MSPS 12-bit ADCs w/16 Channel Multiplexer, 2x 1MSPS 12-bit DACs
Other Peripherals 5x LEDs, 2x Pushbuttons, Secure Cryptographic Key/Certificate Storage
Software Support Ubuntu Linux, Python, Java, C/C++, ROS, FreeRTOS
Power 5V via MicroUSB or 3.7V-17V via Power Pins
Dimensions 3.5” x 2.0” (88.9mm x 50.8mm)
F eatu r e snic k e r doodle one snic k e r doodle black Chipset Xilinx Z ynq-7010 Xilinx Z ynq-7020 CPU 32-bit Dual-Co r e ARM Co r tex-A9 w/640kB Cache and 2x 128-bit N E ON Copr ocessors Performance 3,335 DMIPS/2.6 GF L OPS@667MHz 4,330 DMIPS/3.4 GF L OPS@866MHz Flash 16MB XIP NOR + up t o 200GB SDIO N AND via Captive Mic r oSD Ca r d Cage DRAM/bandwidth 512MB/25.6Gbps 1GB/25.6Gbps SRAM/bandwidth 256kB/28.4 Gbps 256kB/36.9 Gbps FPGA 430K gates/17,600 L U T -6 1.3M gates/53,200 L U T -6 32-bit performance 143,150 MIPS@350MHz 587,575 MIPS@475MHz Distributed RAM 270kB/3,354Gbps 630kB/10,275Gbps DSP Performance 74 G M ACs/31.8 GF L OPS@461MHz 276 G M ACs/121 . 5 GF L OPS@599MHz T otal User GPIO 155 180 FPGA I/O Performance 16x ADC/100x GPIO/ 4 6.2Gbps 16x ADC/125x GPIO/ 7 5.7Gbps Fi x ed GPIO 33x GPI O , 4x I2S Audio, 14x I 2C, 1x ADC, 2x D A C Wi-Fi 150Mbps SISO 2.4GHz 802.11 n 150Mbps 2×2 MIMO 2.4GHz/ 5 GHz 802.11n Antenna Dual-Band Antenna, Switched U.FL Po r ts Serial Interfaces 2x Gigabit Ethernet, 2x CAN, 2x I2C, SPI, U A R T , USB 2.0 High-Speed, Micr o U SB Console/J T AG Analog Interfaces 2x 1MSPS 12-bit ADCs w / 16 Channel Multiplex e r , 2x 1MSPS 12-bit D ACs Other Perip h e r als 5x LEDs, 2x Pushbut t ons, Secu r e Cr yp t og r aphic K e y/Ce r tificate S t o r age Softwa r e Suppo r t Ubuntu Linux, Python, Java , C/C++, ROS, F r ee R T OS Pow e r 5V via Mic r oUSB or 3.7 V -17V via Power P ins Dimensions 3.5” x 2.0” (88.9mm x 50 . 8mm)

Electrical

Schematics

Note: Schematics provided on this page are for reference only. For the most up-to-date files, please visit our GitHub repository.

Revision 4.11

Revision 3

Older Revisions

Pin-Out Tables

Revision 4.1x

Revision 3

Mechanical

3D Models

DISCLAIMER: BY USING AND/OR REFERENCING THE FILES AND INFORMATION ON THIS PAGE, YOU AGREE AND ACKNOWLEDGE THAT YOU UNDERSTAND THAT THE INFORMATION YOU ARE ABOUT TO DOWNLOAD MAY NOT BE COMPLETE OR ACCURATE, AND THE PRODUCTS DEPICTED IN DRAWINGS, MODELS, SPECIFICATIONS, AND OTHER TYPES OF CONTENT MAY NOT BE TO SCALE, OR THE MOST RECENT VERSION. YOU FURTHER AGREE THAT THESE FILES WILL BE USED IN ACCORDANCE WITH THE TERMS AND CONDITIONS APPEARING IN THE WEB SITE TERMS OF USE INCLUDING USE OF THESE FILES AT YOUR OWN RISK. 

snickerdoodle one

Connectors Up

.IGS

Connectors Down

.IGS

Connectors Up

.STEP

Connectors Down

.STEP

snickerdoodle black

Connectors Up

.IGS

Connectors Down

.IGS

Connectors Up

.STEP

Connectors Down

.STEP

Drawings

Dimensional

Footprint

Images

zynq som
fpga wifi board

Links

Downloads

GitHub

Projects

Wiki

Forum

breakyBreaky

Specifications

Feature

breakyBreaky
I/O 270x Pins on 0.1″ Pitch Headers
Programming Interfaces 14-Pin 2mm Xilinx JTAG Header
Other 0.1” Grid Plated-Through-Hole Prototyping Area
Mechanical 4x Adhesive-Base Locking PCB Supports
Power 5-12V via 2.5mm x 5.5mm DC Barrel Jack
Dimensions 4.92″ x 3.94″ (125mm x 100mm)
F eatu r e b r eakyB r eaky I/O 270x Pins on 0.1″ Pitch H e aders P r og r amming Interfaces 14-Pin 2mm Xilinx J T AG H e ader Other 0.1” Grid Plated-Th r ough-Hole P r o t otyping A r ea Mechanical 4x Adhesive-B a se Locking PCB Suppo r ts Pow e r 5-12V via 2.5mm x 5.5mm D C Barrel Jack Dimensions 4.92″ x 3.94″ (125mm x 100mm )

Electrical

Schematics

Note: Schematics provided on this page are for reference only. For the most up-to-date files, please visit our GitHub repository.

Revision 4.0

Older Revisions

Bill of Materials

Revision 4.0

Mechanical

3D Models

DISCLAIMER: BY USING AND/OR REFERENCING THE FILES AND INFORMATION ON THIS PAGE, YOU AGREE AND ACKNOWLEDGE THAT YOU UNDERSTAND THAT THE INFORMATION YOU ARE ABOUT TO DOWNLOAD MAY NOT BE COMPLETE OR ACCURATE, AND THE PRODUCTS DEPICTED IN DRAWINGS, MODELS, SPECIFICATIONS, AND OTHER TYPES OF CONTENT MAY NOT BE TO SCALE, OR THE MOST RECENT VERSION. YOU FURTHER AGREE THAT THESE FILES WILL BE USED IN ACCORDANCE WITH THE TERMS AND CONDITIONS APPEARING IN THE WEB SITE TERMS OF USE INCLUDING USE OF THESE FILES AT YOUR OWN RISK. 

breakyBreaky

Rev. 4.0

.IGS

Rev. 4.0

.STEP

Drawings

Dimensional

Images

Links

GitHub

Wiki

Forum

piSmasher

Specifications

Feature

piSmasher
Video Output Interface 1x Standard HDMI Type A Receptacle Supporting 1080p60 3D Video Output
Video Input Interface 1x Standard HDMI Type A Receptacle Supporting 1080p60 3D Video Input
Network Interface 2x RJ45 1000Base-T Gigabit Ethernet Jacks (routed through programmable logic)
Additional Interfaces 4x USB 2.0 Hi-Speed Standard-A Host Receptacles
Audio Line Input 1x 3.5 mm Stereo Audio Line-In Jack
Audio Line Output 1x 3.5 mm Stereo Audio Line-Out Jack
Audio Headset 1x 3.5 mm Headset Jack (Stereo Audio, Mono Microphone)
FPGA I/O 1x Male 40-Pin TFM Header for Access to 25 snickerdoodle JC1 Reconfigurable I/O
Additional I/O 1x Male 14-Pin TFM Header for Power and I2C Access
Other 1x 2-Cell LiPo Battery Charging Circuit, I2C Identification and Configuration EEPROM
Programming Interfaces 14-Pin 2mm Xilinx JTAG Header
Mechanical 4x Adhesive-Base Locking PCB Supports
Power 12V via 2.5mm x 5.5mm DC Barrel Jack
Dimensions 3.5” x 5.66” (88.9 mm x 143.8 mm)
F eatu r e piSmasher Video Output Interface 1x Standa r d HDMI T ype A Receptacle Suppo r ting 1080p60 3D Video Outpu t Video Input Interface 1x Standa r d HDMI T ype A Receptacle Suppo r ting 1080p60 3D Video Input Network Interface 2x RJ45 1000Base-T Gig a bit Ethernet Jacks ( r outed thr ough p r og r ammable logic) Additional Interfaces 4x USB 2.0 Hi-Speed St a nda r d-A Host Receptacles Audio Line Input 1x 3.5 mm Ste r eo Audio L ine-In Jack Audio Line Output 1x 3.5 mm Ste r eo Audio L ine-Out Jack Audio Headset 3.5 mm Headset Jack ( Ster eo Audio, Mono Micr o p hone) 1x Male 40-Pin TFM Head e r for Access t o 25 snic k e r doodle JC1 Reconfigu r able I/O FPGA I/O Additional I/O 1x Male 14-Pin TFM Header for Power and I2C Access Other 1x 2-Cell LiPo B a tte r y Cha r ging Ci r cuit, I2C Iden t ification and Configu r ation EEPROM P r og r amming Interfaces 14-Pin 2mm Xilinx J T AG H e ader Mechanical 4x Adhesive-B a se Locking PCB Suppo r ts Pow e r 12V via 2.5mm x 5.5mm D C Barr el Jack Dimensions 3.5” x 5.66” (88.9 mm x 14 3 .8 mm)

Electrical

Schematics

Note: Schematics provided on this page are for reference only. For the most up-to-date files, please visit our GitHub repository.

Revision 4.1

Mechanical

3D Models

DISCLAIMER: BY USING AND/OR REFERENCING THE FILES AND INFORMATION ON THIS PAGE, YOU AGREE AND ACKNOWLEDGE THAT YOU UNDERSTAND THAT THE INFORMATION YOU ARE ABOUT TO DOWNLOAD MAY NOT BE COMPLETE OR ACCURATE, AND THE PRODUCTS DEPICTED IN DRAWINGS, MODELS, SPECIFICATIONS, AND OTHER TYPES OF CONTENT MAY NOT BE TO SCALE, OR THE MOST RECENT VERSION. YOU FURTHER AGREE THAT THESE FILES WILL BE USED IN ACCORDANCE WITH THE TERMS AND CONDITIONS APPEARING IN THE WEB SITE TERMS OF USE INCLUDING USE OF THESE FILES AT YOUR OWN RISK. 

piSmasher

Rev. 4.1

.IGS

Rev. 4.1

.STEP

Drawings

Dimensional

Manuals

piSmasher Supplement

Images

Links

Downloads

GitHub

Projects

Wiki

Forum